While Seiko and Vostok bezels can be removed easily with a little pry from a case knife, the 8926 is an entirely different animal. Thankfully a great guy over on WUS (and maker of aftermarket bezels) put together a few videos on the process. I just did my 4th invicta mod today, and still had to reference it lol. 30 minutes of fumbling around solved in 2 minutes.
Also, I have found that if you plan on reusing the stock insert, it is easiest to pop the crystal out first and access the insert from the inside. But That's just me.
*I have no affiliation with Dave Murphy or Murphy Manufacturing. I have just found him to be very helpful both via email and his videos. And he is just a pretty cool dude with some sweet mods.
https://murphymanufacturing.com/8926_install.html
Sent from my LG-M322 using Tapatalk
As you may have noticed, we we're offline this morning. This was caused by the "Thanks" plug-in going rogue and using up way too many server resources. This triggered an automatic suspension by our hosting provider as they thought it was a malicious attack. The "Thanks" plug-in has been disabled, hopefully temporarily so I can determine if that was indeed the cause, and take steps to prevent it from happening in the future.
I apologize for the disruption and for any confusion that may have caused.
How to: Remove and reinstall an Invicta 8926 bezel
Re: How to: Remove and reinstall an Invicta 8926 bezel
I have to say that everything he puts out, tutorials, products, advice, etc, is top notch high quality stuff.Dub Rubb wrote:While Seiko and Vostok bezels can be removed easily with a little pry from a case knife, the 8926 is an entirely different animal. Thankfully a great guy over on WUS (and maker of aftermarket bezels) put together a few videos on the process. I just did my 4th invicta mod today, and still had to reference it lol. 30 minutes of fumbling around solved in 2 minutes.
Also, I have found that if you plan on reusing the stock insert, it is easiest to pop the crystal out first and access the insert from the inside. But That's just me.
*I have no affiliation with Dave Murphy or Murphy Manufacturing. I have just found him to be very helpful both via email and his videos. And he is just a pretty cool dude with some sweet mods.
https://murphymanufacturing.com/8926_install.html
Sent from my LG-M322 using Tapatalk
I've referenced his videos several times
Let's be Instagram friends @bbrou33
Insta me: bbrou33
Re: How to: Remove and reinstall an Invicta 8926 bezel
I don’t mean to hijack the thread but do you have a recommendation for a case knife I can use for SRPC/Turtle?Dub Rubb wrote:While Seiko and Vostok bezels can be removed easily with a little pry from a case knife, the 8926 is an entirely different animal. Thankfully a great guy over on WUS (and maker of aftermarket bezels) put together a few videos on the process. I just did my 4th invicta mod today, and still had to reference it lol. 30 minutes of fumbling around solved in 2 minutes.
Also, I have found that if you plan on reusing the stock insert, it is easiest to pop the crystal out first and access the insert from the inside. But That's just me.
*I have no affiliation with Dave Murphy or Murphy Manufacturing. I have just found him to be very helpful both via email and his videos. And he is just a pretty cool dude with some sweet mods.
https://murphymanufacturing.com/8926_install.html
Sent from my LG-M322 using Tapatalk
Sent from my iPhone using Tapatalk