I bought a CK high noon model K8M211C1 for modding purposes, I tried accessing the hands, but the case opening in the back is smaller than the dial’s diameter, do I need to remove the glass?, help!
Moved to the correct thread, sorry.
Sent from my iPhone using Tapatalk
As you may have noticed, we we're offline this morning. This was caused by the "Thanks" plug-in going rogue and using up way too many server resources. This triggered an automatic suspension by our hosting provider as they thought it was a malicious attack. The "Thanks" plug-in has been disabled, hopefully temporarily so I can determine if that was indeed the cause, and take steps to prevent it from happening in the future.
I apologize for the disruption and for any confusion that may have caused.
Modding question
Modding question
Last edited by WhaleTail on Sat Sep 19, 2020 10:46 am, edited 2 times in total.
Aka: Watchout on WUS.
Re: Modding question
Has to come out the front, is it glass or acrylic crystal?
If it is glass it might be glued in or held in by the top half of the case aka the fixed bezel, this might have to come off.
If it is glass it might be glued in or held in by the top half of the case aka the fixed bezel, this might have to come off.
Modding question
It is mineral glass, and yes it looks like there is a “fixed bezel” integral to the case (I never attempted to pry one off ever, does it snap on or screw down? is it tricky?)tjcdas wrote:Has to come out the front, is it glass or acrylic crystal?
If it is glass it might be glued in or held in by the top half of the case aka the fixed bezel, this might have to come off.
Sent from my iPhone using Tapatalk
Aka: Watchout on WUS.
Re: Modding question
They are usually pressed into place, I have not worked on this type of case.
Re: Modding question
Thank you; under the loupe: I noticed a small gap by 6 o’clock, the bezel came off easily, and access granted: seconds hand came off to start with:
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Aka: Watchout on WUS.